Core-shell structure and high rate performance of Ce-doped Li4Ti5O12 for lithium-ion battery anode materials

Lithium titanate (LTO) can be a very promising anode material for lithium-ion batteries (LSBs) due to its inherent ability to inhibit the growth of lithium dendrites as well as its unique “zero-strain” properties. Unfortunately, the low electronic conductivity of LTO leads to serious shortcomings in higher electrochemical demands. In this work, the Ce 3+ -doped C@Li 4 Ti 5 - x Ce x O 12 ( x = 0, 0.1, 0.15 and 0.2) anode materials synthesized by the hydrothermal method using carbon spheres as templates showed more significant improvement in both structural and electrochemical properties . The results demonstrate that electronic conductivity, lithium-ion diffusion rate, discharge specific capacity, discharge rate capability, and significant improvement stability of C@Li 4 Ti 5 - x Ce x O 12 ( x = 0.1, 0.15 and 0.2) electrodes . Among them, C@Li 4 Ti 4.85 Ce 0.15 O 12 electrode exhibits the highest initial discharge specific capacity (250.86 mAh/g) at 0.1C, which is 1.28-fold that of C@ Li 4 Ti 5 O 12 (195.94 mAh/g), and initial discharge capacity from 205.96 mAh/g to 170.39 mAh/g after 500 cycles, corresponding to 82.7 % of the initial stable discharge capacity. The outstanding performance of C@Li 4 Ti 4.85 Ce 0.15 O 12 can be attributed to the lower interfacial impedance, higher electronic conductivity, high oxygen vacancy concentration, and moderate amount of Ce 3+ doping can enhance the electrochemical activity. In addition, carbon sphere surface defects shown to be effective in improving lithium-ion storage. This work demonstrates that Ce 3+ doping is an effective method to improve the electrochemical performance of LTOs and provides a more effective guide for designing and optimizing anode electrode materials for lithium-ion batteries.