Failure Behavior and Mechanism of Vat Photopolymerization Additively Manufactured Al2O3 Ceramic Lattice Structures

• Al 2 O 3 lattices with various angle were designed and fabricated by vat photopolymerization. • Combining experiment and simulation to perform mechanical property of Al 2 O 3 lattices. • Failure behavior and mechanism of Al 2 O 3 lattices were revealed by ex- and in-situ tests. Vat photopolymerization additive manufacturing produces lightweight load-bearing ceramic lattice structures that have flexibility, time-efficiency, and high precision, compared to conventional technology. However, understanding the compression behavior and failure mechanism of such structures under loading remains a challenge. In this study, considering the correlation between the strut angle and bearing capacity, body-centered tetragonal (BCT) lattice structures with varying angles are designed based on a body-centered cubic (BCC) structure. BCT Al 2 O 3 ceramic lattice structures with varying angles are fabricated by vat photopolymerization. The mechanical properties, deformation process, and failure mechanism of the Al 2 O 3 ceramic lattice structures are characterized through a combination of ex- and in-situ X-ray computed tomography (X-CT) compression testing and analyzed using a finite element method (FEM) at macro- and micro-levels. The results demonstrate that as the angle increases, the stress concentration gradually expands from the node to the strut, resulting in an increased load-bearing capacity. Additionally, the failure mode of the Al 2 O 3 ceramic lattice structures is identified as diagonal slip shear failure. These findings provide a greater understanding of ceramic lattice structure failures and design optimization approaches.