Predictive mechanical property and fracture behavior in high-carbon steel containing high-density carbides via artificial RVE modeling

The mechanical properties and fracture behavior of high-carbon steel are closely related to the microstructural characteristics. This work developed the artificial representative volume element (RVE) model to explore the effects of microstructural characteristics on mechanical properties and fracture behavior of high-carbon steel containing high-density carbides under uniaxial tension. A series of RVEs with different ferrite grain sizes, particle volume fractions, and particle sizes were generated based on the RSA algorithms. The mechanism-based plasticity model and the three uncoupled damage models were implemented into the RVE modeling. The model parameters were calibrated by the corresponding simulation between in-situ μ DIC and microstructure-based RVE simulation. The predicted mechanical properties and fracture strain from the RVE simulation were in good agreement with the experimental results. Simulated results from a series of RVEs quantified the effects of ferrite grain sizes, particle volume fractions, and particle sizes on strength, elongation, and damage evolution of high-carbon steel containing high-density carbides: strength increases with increasing particle volume fraction while elongation decreases, as well as excessively large or small grain and particle size were not favored to improve elongation. These results were attributed to the damage and internal stress partition.