Influence of shrinkage on the dynamic properties of a cross-laminated timber panel

In this paper, experimental modal analyses of a cross-laminated timber (CLT) panel with three layers subjected to free-free boundary conditions are presented. The present study aims at investigating the effect of changing moisture content on dynamic properties of CLT both experimentally and numerically. Two experimental campaigns with a difference in the average moisture content of the test specimen of 2.7% were analyzed. Although the mass of the specimen is reduced by drying, natural frequencies decrease significantly. The apparent loss of stiffness is attributed to opening of narrow face joints due to shrinkage. This effect introduces additional nonlinear artifacts in the measurement data not complying with linear modal analysis. Using a higher-order shear deformable plate theory in a Finite Element model updating framework, experimental natural frequencies and mode shapes are reproduced satisfactorily covering a wide frequency range. As an outcome of the numerical simulations assuming homogeneous material behavior without directly modeling the narrow face joints, a reduction of the in-plane and out-of-plane shear moduli of the boards constituting the panel of 9 and 16% due to shrinkage, respectively, is identified, while Young's moduli remain almost unaffected. In a simplified analytic model of the plate the occurrence of the observed nonlinear disturbances is explained qualitatively by harmonic frequency generation of a single-degree-of-freedom oscillator with piecewise linear spring stiffness. The study highlights the complexity of the material behavior of CLT panels even for simple geometries without boundary effects and the potentially grave effect of drying shrinkage on the vibration characteristics of these structures. • Change of modal parameters of a CLT panel for two moisture contents. • Effective elastic material properties influenced by shrinkage obtained by Finite Element model updating. • Harmonic frequency generation due to breathing narrow face joints.

Authors

Institutions

Publication Details

Journal
Results in Engineering
Published
2024-10-18
DOI
https://doi.org/10.1016/j.rineng.2024.103140
Citations
4
Primary Topic
Wood Treatment and Properties
Type
article
Field-Weighted Citation Impact
1.06
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Influence of shrinkage on the dynamic properties of a cross-laminated timber panel

Thomas Furtmüller, Fabian Huber, Marco Kendlbacher
4 citations
Results in Engineering
Wood Treatment and Properties
1.06
article

Influence of shrinkage on the dynamic properties of a cross-laminated timber panel

Thomas Furtmüller, Fabian Huber, Marco Kendlbacher
article en
4 citations

Abstract

In this paper, experimental modal analyses of a cross-laminated timber (CLT) panel with three layers subjected to free-free boundary conditions are presented. The present study aims at investigating the effect of changing moisture content on dynamic properties of CLT both experimentally and numerically. Two experimental campaigns with a difference in the average moisture content of the test specimen of 2.7% were analyzed. Although the mass of the specimen is reduced by drying, natural frequencies decrease significantly. The apparent loss of stiffness is attributed to opening of narrow face joints due to shrinkage. This effect introduces additional nonlinear artifacts in the measurement data not complying with linear modal analysis. Using a higher-order shear deformable plate theory in a Finite Element model updating framework, experimental natural frequencies and mode shapes are reproduced satisfactorily covering a wide frequency range. As an outcome of the numerical simulations assuming homogeneous material behavior without directly modeling the narrow face joints, a reduction of the in-plane and out-of-plane shear moduli of the boards constituting the panel of 9 and 16% due to shrinkage, respectively, is identified, while Young's moduli remain almost unaffected. In a simplified analytic model of the plate the occurrence of the observed nonlinear disturbances is explained qualitatively by harmonic frequency generation of a single-degree-of-freedom oscillator with piecewise linear spring stiffness. The study highlights the complexity of the material behavior of CLT panels even for simple geometries without boundary effects and the potentially grave effect of drying shrinkage on the vibration characteristics of these structures. • Change of modal parameters of a CLT panel for two moisture contents. • Effective elastic material properties influenced by shrinkage obtained by Finite Element model updating. • Harmonic frequency generation due to breathing narrow face joints.

Results in EngineeringVol. 24
Universität Innsbruck (AT)
Sustainable cities and communities
Openalex Percentile: Top 24%
Wood Treatment and Properties
1.06
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.