Design and performance investigation of tunnel-FET based energy efficient approximate and accurate adders targeted towards low power IoT nodes

Abstract The proliferation of IoT enabled SoCs in state-of-the-art consumer electronics has necessitated the use of beyond CMOS devices for the energy efficient computations and sensing design space. In the low supply voltage (V DD ) regime, Tunnel FETs (TFETs) have shown serious potential at V DD less than 0.5 V. However, the inherent structure, characteristic interband tunneling and enhance Miller capacitance in TFETs do not allow the conventional CMOS logic design styles to be universally used for TFET based logic circuits. In this paper, we propose three energy efficient and novel TFET based accurate adder circuits namely, Static Energy Recovery Full adder (SERF), Complementary and Level Restoring Carry Logic Full adder (CLRCL) and Balanced Restoring Carry Logic full adder (BRCL) based on constituent TFET based functional units which do not use the CMOS design style. Further, novel approximate adders have been developed for energy efficient implementation in IoT nodes. The BRCL adder consumes approximately 60% less area and 85.36% and 89.6% less energy in comparison to SERF and CLRCL respectively. The approximate adders in the best and worst case facilitate approximately 92% and 75% savings in area and consumes 71% less power than the BRCL adder. When compared to the standard UMC 45 nm bulk MOSFET based designs, the TFET based accurate adders operate at 25% less energy while the approximate adders consume 40% less. All the circuit simulations have been performed using Spectre Simulator of Cadence and device characterization using 2D-TCAD tool.