Experimental Study on Hydrogen Embrittlement-Enhanced Ultrasonic Machining of Inconel 718 Small Hole

Small-hole components of Inconel 718 are widely used in aerospace engineering, medical devices, and other fields. Limited by material properties, its machining efficiency seriously restricts its wide application. The objective of this study is to investigate a novel machining technique for Inconel 718 that integrates ultrasonic machining (UM) and hydrogen embrittlement (HE) treatment. Accordingly, the technique is designated as hydrogen embrittlement-enhanced ultrasonic machining (HEUM). Prior to machining, a stress layer is formed on the surface of the workpiece. To ascertain the fundamental characteristics of Inconel 718, the influences of ultrasonic amplitude, HE time, and HE voltage on the specific material removal rate and surface roughness in the presence of HE were empirically examined. To investigate the material removal process for HEUM, the nanoscratch test and nanoindenter were also conducted with HE samples. Further, the subsurface for HEUAG samples were obtained with SEM. The specific material removal rate under experimental conditions of 10 min and 5 V HE increased by 27.4%. Finally, HEUM is proposed to be used for a 1 mm through-hole with Ra 0.318 μm. A precision hole with a diameter as small as 0.5 mm has been manufactured.