Equilibrium of fluid fluxes in the wake of a three-dimensional flat-back bluff body

The turbulent wake behind a flat-back Ahmed body is investigated using stacked stereoscopic particle image velocimetry. The wake is disturbed by a steady jet from the centre of the base and the effects are quantified for key blowing rates. The unactuated wake exhibits bistable dynamics in the horizontal plane that are completely subdued for the optimal blowing case, yielding a base drag reduction of 9 %. The three-dimensional mean wake is reconstructed and used to evaluate the wake mass fluxes whose equilibrium determines the recirculation length. The results for the unactuated wake show that up to 80 % of replenishment fluid flux entering the recirculation bubble from the free-stream flow is provided through the low-pressure side of the base, where the symmetry-breaking shear layer roll-up occurs near the base. For the optimal blowing configuration, where the wake becomes symmetric, the flux of wake replenishment is severely reduced. This flow configuration results in elongated shear layers on all sides, which terminate the bubble with a roll-up of reduced intensity at a further downstream location. The dominant cause of bubble growth and the accompanying drag reduction is attributed to the momentum of the base blowing, and the new regime is referred to as the ‘favourable momentum regime’. Similar trends are observed when the model is at $5^{\circ }$ yaw where a reduction of drag and yaw-induced asymmetry are obtained. Proper orthogonal decomposition of the wake reveals the coherent structures related to the bistable flow and the symmetric wake under optimal blowing coefficient.