Effect of high pressure-low plasticity burnishing on the mechanical and microstructural behaviour of copper foil interlayered FSW aluminium alloys

Abstract This study delves into the impact of high pressure-low plasticity burnishing (HP-LPB) on the mechanical and microstructural behaviour of friction stir welding (FSW) joints, specifically involving AA5052 and AA6082 aluminium alloys. Notably, copper foil (CF) is introduced as a novel element in the HP-LPB process to enhance the weld strength. The experiments were conducted with the tool rotational speeds (TRS) of 1000, 1100, and 1200 RPM, each paired with the welding speeds (WS) of 20, 25, and 30 mm min −1 , and tool tilt angle (TTA) of 0°, 1°, and 2°. Mechanical behaviour is assessed through tensile testing along with microhardness measurements, revealing the advantages of HP-LPB with CF in enhancing joint strength and toughness. The microstructural analysis reveals the dissolution of precipitates, highlighting the influential role of copper foil in the improvement of joint efficiency. From the weld without a CF interlayer, a maximum tensile strength of 188 MPa was achieved at a TRS of 1200 RPM, WS of 25 mm min −1 and TTA of 2°. The post-processed FSW sample interlayered with copper foil, exhibited an improvement in joint efficiency by 87% at the optimum process parameter. This research demonstrates that the use of copper foil interlayers combined with HP-LPB treatment can substantially enhance the mechanical properties and structural integrity of FSW aluminum alloys, offering a valuable solution for advanced industrial applications.