INVESTIGATION OF FLUORINATED DOUBLE-WALL CARBON NANOTUBES

Experimental results of investigation of the original and fluorinated ultra-long double-walled carbon nanotubes (DWCNTs) with a length of at least 1000 μm are presented. The degree of fluoridation did not exceed 27 at.%. It has been shown that the process of fluorination of samples of double-walled carbon nanotubes deforms the outer surface of the nanotube wall although does not destroy its internal concentric structure, while the diameter of the fluorinated nanotube increases by 1.5-2 times. In addition, the fluorinated samples, which were thermochemically purified from iron particles and other forms of carbon before fluorination, demonstrated many split/cut ends of nanotubes. The effect of fluorination on the electrical properties of initial and purified samples of double-walled carbon nanotubes was studied. It was revealed that with an increase in temperature from 80 to 300 K for non-fluorinated and fluorinated purified nanotube samples, the resistivity decreases, which corresponds to the semiconductor nature of the conductivity. It was also revealed that when a sample of initial DWNT is fluorinated, a change in the nature of conductivity from semiconductor to metallic is observed. With an increase in temperature from 80 to 300 K, the resistance of the non-fluorinated sample of the original DWNTs decreased by 45%, while the resistance of the fluorinated sample increased by 11%. Despite the decrease in electrical conductivity as a result of fluorination of the purified samples, all samples remained conductors, which presumably indicates partial fluorination of the outer wall of the DWNTs while maintaining the structure of the inner wall. Thus, fluorination of double-walled carbon nanotubes with a well-aligned and concentric structure leads to the formation of fluorocarbon nanostructures, which can be promising materials for electronic nanodevices. For citation: Karaeva A.R., Khaskov M.A., Kurzhumbaev D.Zh., Kulnitskiy B.A., Mordkovich V.Z. Investigation of fluorinated double-wall carbon nanotubes. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 10. P. 38-48. DOI: 10.6060/ivkkt.20246710.4y.

Authors

Publication Details

Journal
IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
Published
2024-10-12
DOI
https://doi.org/10.6060/ivkkt.20246710.4y
Primary Topic
Carbon Nanotubes in Composites
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

INVESTIGATION OF FLUORINATED DOUBLE-WALL CARBON NANOTUBES

М. А. Хасков, B. A. Kulnitskiy, Vladimir Z. Mordkovich, Aida R. Karaeva et al.
IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA
Carbon Nanotubes in Composites
article

INVESTIGATION OF FLUORINATED DOUBLE-WALL CARBON NANOTUBES

М. А. Хасков, B. A. Kulnitskiy, Vladimir Z. Mordkovich, Aida R. Karaeva, Didar Zh. Kurzhumbaev
article en

Abstract

Experimental results of investigation of the original and fluorinated ultra-long double-walled carbon nanotubes (DWCNTs) with a length of at least 1000 μm are presented. The degree of fluoridation did not exceed 27 at.%. It has been shown that the process of fluorination of samples of double-walled carbon nanotubes deforms the outer surface of the nanotube wall although does not destroy its internal concentric structure, while the diameter of the fluorinated nanotube increases by 1.5-2 times. In addition, the fluorinated samples, which were thermochemically purified from iron particles and other forms of carbon before fluorination, demonstrated many split/cut ends of nanotubes. The effect of fluorination on the electrical properties of initial and purified samples of double-walled carbon nanotubes was studied. It was revealed that with an increase in temperature from 80 to 300 K for non-fluorinated and fluorinated purified nanotube samples, the resistivity decreases, which corresponds to the semiconductor nature of the conductivity. It was also revealed that when a sample of initial DWNT is fluorinated, a change in the nature of conductivity from semiconductor to metallic is observed. With an increase in temperature from 80 to 300 K, the resistance of the non-fluorinated sample of the original DWNTs decreased by 45%, while the resistance of the fluorinated sample increased by 11%. Despite the decrease in electrical conductivity as a result of fluorination of the purified samples, all samples remained conductors, which presumably indicates partial fluorination of the outer wall of the DWNTs while maintaining the structure of the inner wall. Thus, fluorination of double-walled carbon nanotubes with a well-aligned and concentric structure leads to the formation of fluorocarbon nanostructures, which can be promising materials for electronic nanodevices. For citation: Karaeva A.R., Khaskov M.A., Kurzhumbaev D.Zh., Kulnitskiy B.A., Mordkovich V.Z. Investigation of fluorinated double-wall carbon nanotubes. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2024. V. 67. N 10. P. 38-48. DOI: 10.6060/ivkkt.20246710.4y.

IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYAVol. 67(10)
Openalex Percentile: Top 89%
Carbon Nanotubes in Composites
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.