Preparation and Photocatalytic Performance of In2O3/Bi2WO6 Type II Heterojunction Composite Materials

Bismuth-based photocatalytic materials have been widely used in the field of photocatalysis in recent years due to their unique layered structure. However, single bismuth-based photocatalytic materials are greatly limited in their photocatalytic performance due to their poor response to visible light and easy recombination of photogenerated charges. At present, constructing semiconductor heterojunctions is an effective modification method that improves quantum efficiency by promoting the separation of photogenerated electrons and holes. In this study, the successful preparation of an In₂O₃/Bi₂WO₆ (In₂O₃/BWO) II-type semiconductor heterojunction composite material was achieved. XRD characterization was performed to conduct a phase analysis of the samples, SEM and TEM characterization for a morphology analysis of the samples, and DRS and XPS testing for optical property and elemental valence state analyses of the samples. In the II-type semiconductor junction system, photogenerated electrons (<i>e</i>^-) on the In₂O₃ conduction band (CB) migrate to the BWO CB, while holes (<i>h</i>⁺) on the BWO valence band (VB) transfer to the In₂O₃ VB, promoting the separation of photoinduced charges, raising the quantum efficiency. When the molar ratio of In₂O₃/BWO is 2:6, the photocatalytic degradation degree of rhodamine B (RhB) is 59.4% (44.0% for BWO) after 60 min illumination, showing the best photocatalytic activity. After four cycles, the degradation degree of the sample was 54.3%, which is 91.4% of that of the first photocatalytic degradation experiment, indicating that the sample has good reusability. The XRD results of 2:6 In₂O₃/BWO before and after the cyclic experiments show that the positions and intensities of its diffraction peaks did not change significantly, indicating excellent structural stability. The active species experiment results imply that <i>h⁺</i> is the primary species. Additionally, this study proposes a mechanism for the separation, migration, and photocatalysis of photoinduced charges in II-type semiconductor junctions.