TEMPERATURE EFFECT ON THERMOLUMINESCENCE KINETIC PARAMETERS OF NANO-ALUMINA

This research explores the fundamental thermoluminescence characteristics of irradiated nano-α-alumina particles, investigating their response to varying heating rates. The study involves recording TL luminescence curves, revealing a distinct peak with a maximum at approximately 202°C. As dose levels increase, the peak consistently shifts towards lower temperatures, indicating adherence to non-first-order kinetics (b≠1). The crystallite size was calculated using XRD analysis and estimated as 40nm. To examine the impact of the heating rate on the TL glow curve and derive kinetic parameters for nano α-Al2O3, specimens were exposed to a 6 kGy dose. Subsequently, TL glow curves were documented over a temperature range from room temperature to 300°C, employing different heating rates (2, 4, 6, 8 and 12°C/s). The peak temperature of the glow peak shifts towards higher temperatures as the heating rate increases and the peak intensity continuously diminishes, aligning with TL theory. The observed decrease in TL glow peak intensity with escalating heating rates is attributed to thermal quenching, where quenching efficiency rises at higher temperatures. Normalizing maximum TL intensities to the lowest heating rate (2°C/s) reveals a substantial 22% decrease in peak intensity.