Ultrasound Activated Clay: Preliminary Study of PB And as Removal in Aqueous Media

Objective: The objective of this study was to evaluate the removal of Pb and As in aqueous media by activated clay (AC). Theoretical Framework: Heavy metals in water represent a risk to health and ecosystems, their removal through new materials is a challenge for the industry. Method: The methodology adopted for this research comprises in that natural clay (NC) was activated with sodium chloride and phosphoric acid followed by sonication. A synthetic solution of Pb and As was prepared at different pH. Results and Discussion: The zero charge point was found to be 7.10 for AC and 8.02 for NC, the ζ potential was found to be between - 41.15 and - 45.43 mV in the pH range of 4 to 12, with degree of crystallinity of 97.24% and crystal size of 2.85 nm determined by XRD. FTIR analysis allowed the identification of functional groups with chelating capacity. Was observed As removal of 75.51% (110.40 mg/g) and 23.23% (58.13 mg/g) and 97.75% (106.41 mg/g) and 100.0% (206.53 mg/g) for Pb with AC and NC respectively at pH 6 and 8. Research Implications: Los reaultadoe encontrados sugieren que la arcilla activada se convierte en un material alta capacidad de adsorción de metales pesados en sistemas multimetal. Esta cualidad se debe al incremtno de grupos funionales en su superficie y al tamaño nanométrico que incrementa el área de contacto. Originality/Value: Activation of the clay with sodium chloride and weak acid followed by sonication is an environmentally friendly process that produces a material with high heavy metal removal capacity in aqueous media.