Experimental Study on LTE Mobile Network Performance Parameters for Controlled Drone Flights

This paper analyzes the quantitative quality parameters of a mobile communication network in a controlled drone logistic use-case scenario. Based on the analysis of standards and recommendations, the values of key performance indicators (KPIs) are set. As the main network-impacting parameters, reference signal received power (RSRP), reference signal received quality (RSRQ), and signal to interference and noise ratio (SINR) were selected. Uplink (UL), downlink (DL), and ping parameters were chosen as the secondary ones, as they indicate the quality of the link depending on primary parameters. The analysis is based on experimental measurements performed using a Latvian mobile operator's "LMT" JSC infrastructure in a real-life scenario. To evaluate the altitude impact on the selected network parameters, the measurements were performed using a drone as transport for the following altitude values: 40, 60, 90, and 110 m. Network parameter measurements were implemented in automatic mode, allowing switching between LTE4-LTE2 standards, providing the opportunity for more complex analysis. Based on the analysis made, the recommendations for the future mobile networks employed in controlled drone flights should correspond to the following KPI and their values: -100 dBm for RSRP, -16 dB for RSRQ, -5 dB for SINR, 4096 kbps for downlink, 4096 kbps for uplink, and 50 ms for ping. Lastly, recommendations for a network coverage digital twin (DT) model with integrated KPIs are also provided.