Critical current characteristics and ampere force distribution of a novel HTS cable with different transposition lengths

Abstract Distribution characteristics of the current, ampere force and magnetic flux density (B [T]) of a novel high temperature superconducting (HTS) cable woven by transposed REBCO tapes under different transposition lengths are proposed, and these characteristics of the cable stacked with 3 REBCO tapes are also carried out in this paper for comparison. The objective is to enhance the current density and the compactness of the HTS tapes combination, and uniform the current, ampere force and magnetic flux density (B [T]) distributions. A three-dimensional (3D) finite element model, based on Maxwell’s equations without consideration of the displacement current, is established to describe the state of the system in the liquid nitrogen condition. The distributions characteristics, maximum and minimum values of current, ampere force and magnetic flux density (B [T]) show significant differences in the simulation results between the novel HTS cable woven by 3 transposed REBCO tapes and the cable stacked with 3 REBCO tapes. The simulated results show that the distribution characteristics are improved, with a more uniform distribution characteristic than that of the cable stacked with REBCO tapes. This is due to fully transposed REBCO tapes. In addition, the experimental E–I curve was also reached. The experimental results show that using a shorter transposition length in the cable can improve the critical current. However, a too small transposition length can cause significant damage to the HTS tape, resulting in deformation of the HTS tape and a reduction in the electromagnetic properties of the HTS tape. This affects the critical current of the HTS tape and, ultimately, the critical current of the cable. From the point of view of whether the production process is convenient, meets the requirements of economy and reduces costs, we need to find a suitable transposition length. The measured optimal transposition length is 95 mm for the cable woven by 3 REBCO tapes.