Development of a low frequency acoustic energy harvesting system by using piezoelectric transducers mounted on a metallic plate placed inside the centre of a hollow cylinder

Abstract In this work, we are demonstrating an innovative acoustic energy harvesting system that utilizes a hollow polyvinyl dichloride cylinder with a metallic circular plate placed at the centre inside with five piezoelectric transducers mounted on it. A speaker, used as a source of acoustic waves, is fixed at the top of the cylinder by using a clamp. The cylinder, upon exposure to incident acoustic waves, induces resonance within it, generating an amplified stationary wave. The generated vibration drives the metallic plate mounted with piezoelectric transducers, which serves as a diaphragm. As a result, a pressure difference is developed across it and due to piezoelectric effect on the transducers, electricity is produced. Experimental results show that the system output voltage and power depends on various factors, including the elastic properties of the metallic plate, resonance frequency, and the distance of separation between the acoustic source and the plate. At an incident sound pressure level of 75 dB, the experimental results show that, at an acoustic resonance frequency of 310 Hz, the system yielded a maximum peak to peak voltage of 1000 mV and output power of 0.612 μW. Incorporation of a voltage doubler circuit with the harvester increases its power to 57.6 μW. The simplicity in design and cost-effectiveness of the proposed acoustic energy harvesting system renders it to be a promising avenue for energy harvesting implementations.