Effects of Typical Supplementary Cementitious Materials (SCMs) on the Bonding Property of Cement with Casing under Shallow Formation of Deep-Water Environment

Due to low temperature environments and other factors, the performance of cement slurry is affected by deep-water shallow formation cementing, which makes it difficult to ensure the interface bonding quality. The objective of this study is to investigate the effect of fly ash (FA), metakaolin (MK), and microsilica (MS) as supplementary cementitious materials (SCMs) by replacing 5–20% of the cement on the bonding property of cement with casing in the shallow formations of deep-water environments. This is based on the cementing conditions for the 20″ surface casing in the deep-water shallow formation of the LS18-1 well area. Under the 30 °C experimental conditions, the results showed that the compressive and bonding strength of cement with FA and MS decreased gradually as their dosage increased. In contrast, compared with the control group (BG0), the compressive strength of the MK group increased by 25.6%, 32.1%, and 24.2% under the optimal dosages (MK15, MK15, MK20) at 3, 7, and 14 days (d), and the bonding strength increased by 73.6% at 3 d (MK15) and 34.9% at 7 d (MK15). The test analysis showed that MK can promote cement hydration and generate more hydration products, which are conducive to cement-casing interface cementation. Additionally, it can improve the pore structure, reduce the fractal dimension of the pore volume, and ensure a more reasonable distribution of cement stone crack openings.