A Comparative Study of Non-Destructive Testing Techniques: Active Thermography versus Shearography for 3D-Printed Thermoplastic Composites Reinforced with Continuous Carbon Fiber

This study investigates the feasibility and effectiveness of two non-destructive testing methods, active thermography and shearography, on 3D-printed thermoplastic (TP) composites reinforced with continuous carbon fiber. Artificial defects were introduced into the composite plate to benchmark the detection capabilities of these non-destructive testing techniques (NDT). Active thermography produced a thermogram that highlighted defects through variations in surface temperature. Although effective for identifying defects ranging from 3 to 10 mm in size at four different depths, specifically 1 mm, 1.25 mm, 1.5 mm, and 1.75 mm, through the thickness of a 2.8 mm plate, the method encountered some limitations. It faced challenges in detecting deeper defects and accurately determining their shapes. Shearography, which utilizes fringe pattern distortions to detect surface displacement anomalies, successfully identified near-surface defects within the same size range. However, it required more expertise for accurate interpretation and struggled with detecting smaller and deeper defects. The complementary strengths and limitations of these methods suggest that employing both could offer a more comprehensive solution for defect detection in 3D-printed TP composites.