Energy management of residential buildings using innovative passive techniques

Abstract Recently, efforts on sustainability and energy savings in buildings have increased due to the growing global awareness of the energy use of buildings and the negative impacts of carbon dioxide emissions on climate change. As a result, it is critical to propose effective strategies to reduce such energy consumption. The goal of this project is to advance the idea of net-zero energy buildings as a worldwide mitigation method for climate change. Thus, a numerical model was developed and validated to investigate the passive cooling capabilities of an innovative phase change material (PCM)-based phase cube in residential buildings. The proposed phase cube includes six various PCM-compact storage module (PCM-CSM) configurations including Rubitherm’s SP-24E plates (Horizontal), Half Circular Inline, Half Circular Staggered, Vertical plates, Inline Cylindrical and Staggered Cylindrical compact storage modules. All the proposed designs were numerically simulated, and the obtained results were compared and analysed at an inlet air temperature and velocity of 35°C, and 4m/s, respectively and each phase cube contained the same mass of Rubitherm’s SP-24E PCM, which was 30.326 kg. The results showed that the Horizontal, Half Circular Inline and Vertical phase cubes can absorb heat at a higher rate from fresh air at nearly 496.19w, 465.9w and 458.16w, respectively translating the lowest outlet air temperature of about 25°C from the cube. Integrating such phase cubes into residential buildings for indoor passive air cooling substantially decreased the building cooling loads, resulting in reduced electric energy consumption by the air conditioning system.