Research on Internal Flooding Analysis of Small Modular Reactors Based on Particle Method

Abstract The analysis of internal water flooding in nuclear power plants is a necessary part of safety review in the approval process of nuclear power plant construction projects. According to relevant regulations, it is necessary to conduct water flooding spread analysis on pipelines, water tanks, or pools filled with liquid in nuclear power plant buildings, analyze the spread path and water flooding height. This article analyzes and calculates the flow characteristics of water in a nuclear power plant building using a fluid calculation method based on the Lagrangian method (particle method). Taking the small modular reactor JR building as a case study, it analyzes the spread and height of four water flooding sources inside the building. According to the simulation time of 1800S, the results show that the flooding caused by the No. 2 water source is the most severe, with a flooding height of 1.367m. Drainage or preventive measures need to be taken to prevent the pipeline from breaking accidents; The flooding sources 1, 2, and 4 have a relatively mild impact, resulting in a lower flooding height and will not have a significant impact on important safety equipment, with little impact on the safety of nuclear power plants. The CFD analysis method was used to conduct water flooding analysis for nuclear power plants, which has the characteristics of strong adaptability and good visualization. It can dynamically simulate the entire process of water flooding analysis and better guide the design of water flooding protection for nuclear power plants.