COMPUTER DIAGNOSTICS OF THE CONDITION OF SHIP ROLLING BEARINGS DURING THEIR OPERATION

The results of statistical processing of vibration signals obtained during diagnostics of ship power plants during the operation process are offered. A distinctive feature of monitoring the technical condition of elements of ship power plants is the uncertainty in the fixation and duration of extreme loads. The peculiarity of computer vibration diagnostics of rotary mechanisms is determined, which is that, in particular, physical measurements of vibration signals require their use in mathematical models of the physical state of the bearing. Calculations of statistical characteristics of vibration signals in the time domain, such as standard deviation (Std), asymmetry (Skewness), kurtosis (Kurtosis), full range of oscillations (Peak2Peak), root mean square value (RMS), cross factor (CrestFactor), form- factor (ShapeFactor), impulse factor (ImpulseFactor), marginal factor (MarginFactor), energy (Energy). The variety of diagnostic signals leads to the need to merge indicators of different dimensions without losing available information into a single generalizing indicator, for which the method of principal components is used in the work. The methodology of statistical processing and practical implementation of diagnostics of vibration signals during the analysis of damage evolution of rolling bearings of turbochargers of marine power plants are described. A new computer information parameter of vibration diagnostics based on the analysis of the first principal component in the time domain and spectral excess in the frequency domain has been identified and experimentally confirmed. The use of new diagnostic parameters makes it possible not only to judge the degree of damage to the rolling bearing, but also to observe the dynamics of the development of the defect and make a relative forecast of the working life of the rolling bearing. A real practical situation is considered - computer diagnostics of vibration signals of ship rolling bearings of a point defect of an external defect of a rolling bearing ring. Determining the applicability of the principal component method to other types of defects showed their potential for vibrodiagnosis of defects located on the inner ring of the bearing and when the ball falls out of the holder.