Tracking the Role of Faults on Mudstone Caprock Seals: A Case Study from Beier Depression, Hailar Basin, NE China

To study the oil and gas enrichment characteristics of the reservoir rocks in the second Member of the Nantun Formation (N2) of the F1 fault in the Beier Depression, this research focuses on the mechanism of shortening the sealing time of the regional mudstone cap due to faults and the factors influencing the sealing duration. The period during which the regional mudstone cap seal began is determined by analyzing the relationship between the diagenetic index of the regional mudstone cap and its underlying reservoir rocks and time. This relationship between the rock-formation index and time helps establish the onset of regional mudstone cap seal, and from this, the index of shortening time due to faults is derived. A research framework to study the sealing time shortening of regional mudstone cap seal caused by a fault was developed, which was further applied to analyze the relationship between the fault-induced shortening time of the seal in the lower of the first Member of the Damoguaihe Formation section (D1x) of the Beier Depression and hydrocarbon concentrations in the N2 Formation. The results show that the F1 fault at measurement points 1–4, 6, and 9–11 reduced the blocking time of the regional mudstone cap in D1x to 100%, hindering hydrocarbon accumulation and preservation in the N2. Conversely, the F1 fault at measurement points 5, 7, 8, and 12–15 reduces the blocking time of the regional mudstone cap in the D1x by 37–99%, which is more conducive to hydrocarbon accumulation and preservation in N2, resulting in positive oil and gas shows. Based on the test results, a discussion on the feasibility, applicability, and limitations of the new method is conducted, yielding the following conclusions: (1) The relationship between oil and gas indications in the reservoir rocks of the Nan’er Member confirms the feasibility of the new method. The research findings of the new method on the F1 fault align with current oil and gas exploration realities, indicating its potential use in studying the degree to which faults shorten the sealing time of regional mudstone caprocks. (2) The new method is primarily applicable to the study of the modification effects of tensile normal faults on regional mudstone caprocks and their impact on oil and gas sealing capacities. However, its application to other types of faults may have limitations. (3) The new method is mainly suitable for caprocks dominated by mudstone. When studying other types of caprocks, such as carbonate rocks, evaporites, igneous rocks, and metamorphic rocks, different research methods and technical means are required. These findings provide valuable insights for oil and gas exploration efforts near fault zones.