A simulation analysis on the internal and external application of new silica-aerogel-based (Quartzene) coatings effects on energy use in a typical building in two different climates

The study investigates the impact of improved synthetic amorphous silica, specifically developed aerogel-based insulating coatings, Quartzene (Qz), on energy efficiency in buildings across cold and warm climate zones. Simulations were conducted on various coatings and thicknesses for exterior and interior wall surfaces, as well as roofs. These were evaluated using a prototype residential building under dynamic thermal conditions. Wall coatings were analyzed, including a base plaster and a mixture with 10%Wt aerogel-based Quartzene. Additionally, three roof coating samples were tested: Qz 12.5%Wt, TiO2 3.3%Wt, and a blend of aerogel-based mixtures and TiO2. Mixtures containing Qz exhibited the lowest thermal conductivity (0.05 W/(m·K)) and high short-wave reflectance (up to 0.93 μm), impacting transmission loads, time lag, and decrement factor. Energy savings of up to 11% were observed in warm climates when implementing the coatings (unaged performance). Overall, the coated surfaces increased time lag and reduced decrement factor compared to uncoated surfaces. Aerogel-based coatings showed enhanced effectiveness in lowering transmission loads.