Analysis of the ecological footprint of mining machines in the phase of material extraction and processing in LCA

Sustainability in the mining industry continues to be a challenge. Although there is research in this area, there are still no solutions supporting the assessment of environmental impact in this sector. Therefore, it is important to look for and conduct various types of analyses that will be useful in this area. Therefore, the objective of the research was to analyse the ecological footprint of mining machines in the first phase of the LCA life cycle (obtaining and extracting materials). The analysis was based on the example of a hydraulic actuator, which is considered crucial to control machines in the mining industry. The ecological footprint burdens analysed included direct and indirect land take, sequestration of carbon dioxide (CO2) emissions, and the use of nuclear energy. Life cycle assessment was carried out using the OpenLCA software with the ecoinvent v3.10 database. It has been shown that the largest amount of emissions occurs during off-site treatment of nonsulphide waste, cogeneration of heat and energy (hard coal), production of ferrochrome, high carbon, 68% Cr, and heat production in an industrial furnace using hard coal. It is proposed to carry out improvement activities that will first contribute to reducing the main environmental burdens. Then, it will be possible to significantly reduce the negative environmental impact of the hydraulic actuator's extraction and processing of materials. The results from the analysis may be useful not only for products from the mining industry but also in other areas of activity using this type of machine.