Reference Material for the Composition of Fuel Oil

Electrical transformers are a key element in the process of distributing electricity from the producer to the final consumer. The reliability of electrical transformers is ensured through systematic monitoring of the structural condition using chemical analysis of fuel (transformer) oil used for electrical insulation and cooling of transformers. The working life of energy oil and paper insulation can be assessed by evaluating the content of antioxidant additive (ionol) and furan derivatives (furfuryl alcohol, furfural, 2-acetylfuran and 5-methylfurfural). The article provides a critical analysis of methods for measuring ionol and furan derivatives in oils. In particular, it has been established that the most widely used methods for the identification of ionol and furan derivatives are liquid and gas chromatography methods with preliminary isolation of analytes based on the principles of liquid/solid-phase extraction. At the same time, the need for matrix reference materials with established metrological traceability was identified for metrological support of methods for measuring the content of ionol and furan derivatives in oils. Therefore, the purpose of this study was the development of a certified reference material (CRM) for the composition of fuel oil. The technology for producing such a CRM makes it possible to prepare the material with the required concentrations of analytes. The article describes the sequence of preparation of a CRM batch and presents the conclusions of studying the stability and between-bottle homogeneity of the material. The given calculation of the standard uncertainty for the certified value of the CRM from the characterization method, heterogeneity, and instability of the material in accordance with GOST ISO Guide 35–2015 deserves attention. The metrological traceability of certified values of the CRM to the unit of value «mass fraction of a component» reproduced by the State Primary Standard of units of mass (molar) fraction and mass (molar) concentration of organic components in liquid and solid substances and materials based on liquid and gas chromatography-mass spectrometry with isotope dilution and gravimetry (GET 208–2019). The competence of the study is confirmed by the fact that the CRM was recognized as GSO 12232–2023.