Influence of Applied Discharge Voltage and Gas Flow Rate on Nickel Plasma Jet Parameters Diagnosed by Optical Emission Spectroscopic Technique

Abstract: In this work, we measure the plasma parameters by using an AC high-voltage power supply that generates a non-thermal plasma jet system at atmospheric pressure. A nickel (Ni) metal strip, with dimensions of 1.5 × 10 cm2, was connected to the anode electrode of the AC power supply. This nickel strip was immersed in a flask with a small amount of distilled water positioned below the plasma plume nozzle. Optical emission spectroscopy (OES) was used to diagnose the plasma system at different argon gas flow rates (1-5 L/min) and varying applied voltage values (11-15 kV). It is significant to know the processes accompanying plasma generation to measure their parameters which include the electron temperature (Te), electron number density (ne) of the plasma, Debye length (λD), and plasma frequency (fp). Our results showed an increase in the intensity of spectral lines with the increase in applied discharge voltage (11-15 kV). The maximum peak for ArI was observed at a wavelength of 811.531 nm, and the maximum peaks for nickel (Ni) were observed at wavelengths of 285.21 and 519.70 nm. Also, the results indicated a gradual increase in electron temperature (Te) and electron density (ne) values at the applied voltage of 0.403-0.468 eV. Likewise, the electron density (ne) was in the range of (11.486-13.851) × 1017 cm-3. Keywords: Atmospheric plasma jet, Nickel (Ni) plasma parameters, Electron temperature, Spectroscopic optical emission (OES).