Estimated of Pomegranate Peel Waste for Biosorption of Cu (II) & Pb(II) Ions From Aqueous Solutions

This study intends to explore the waste natural materials’ adsorption capability. The use of pomegranate peels was investigated to see the chances of eradicating Pb(II) and Cu(II) ions from the aqueous solutions. Adsorption capability was evaluated using batch adsorption experiments, which also evaluated the impact of solution pH and initial metal concentration. The ideal biosorption conditions included a pH of 6.0, a dose of 0.1 g of biomass, and an equilibrium duration of 90 minutes. The adsorption data fit in a way that was comparable to the isotherm models by Freundlich and Langmuir. Pomegranate peel (PGP) was tested for its affinity and adsorption capability. Based on the values of the separation factor (RL) and Freundlich constant (n), it seems that the metal ions were taken up onto biosorbents in a preferred manner. According to this study's conclusions, the equilibrium data suit the Freundlich and Langmuir isotherms rather nicely. According to correlation coefficient data, the maximal sorption capacity of the produced pomegranate peel is 5000 mg/g. The Fourier Transform Infrared Spectrometer (FTIR), Energy Dispersive X-ray Spectrometer (EDX), and Scanning Electron Microscope (SEM) were utilised in the characterisation examinations. As a result, distinct aggregates formed on the surface of the biosorbent. In the characterisation experiments, an energy-dispersive X-ray spectrometer (EDX) and a scanning electron microscope (SEM) were employed. Different aggregates developed on the biosorbent surface as a result of contact with metal ions. On the surface of the biosorbent, distinct aggregates formed as a result of interaction with metal ions. Either via complexation or electrostatic attraction, the metal ions attached themselves to the biosorbents' active sites.