Optimisation of bioaerosol sampling using an ultralight aircraft: A novel approach in determining the 3-D atmospheric biodiversity

Bioaerosols, such as pollen and fungal spores, are routinely monitored for agricultural, medical or urban greening practices, but sampling methodology is largely relying on techniques more than half a century old. Moreover, biomonitoring campaigns often take place in urban environments, although sources can be located outside cities' borders with ampler vegetation. Therefore, the question arises whether we are accurately picturing the biodiversity and abundance of regional bioaerosols and whether those locally detected might derive from long-distance transport, horizontally or vertically. To answer the above, we used novel, mobile monitoring devices, and aerial measurement units, like aircrafts, so as to explore bioaerosol concentrations at a variety of altitudes. An ultralight aircraft was equipped with a sampling device for bioaerosols. The device consisted of duplicate isokinetic impactors that match the physical functioning and the microscopic quantification method of the widely used ground-based Hirst-type impactors. Isokinetic airflow was realized by adjusting the air flux at the impactors' inlet to the airspeed of the aircraft. Three campaigns were made, where the comparability, efficiency and accuracy of different sampling devices were determined, namely of the abovementioned impactor, and of the mobile conventional Hirst-type pollen sampler. The campaigns involved measurements from ground level (0 m altitude) up to 900 m (above ground level (agl)) via flights. Our results showed that aircraft-based airborne pollen concentration measurements were consistently higher than those of all other devices, regardless of the altitude and sampling time. It is noteworthy that the pollen concentration exceeded 500 pollen grains/m³ at >900 m of altitude, this concentration being 1.77 times higher than that simultaneously measured at ground level. Likewise, the diversity of pollen was also higher at higher altitude. Our results indicate the usability and superiority of small aircraft and high-flow impactors for research, achieving higher biodiversity and abundance over a shorter sampling interval compared to conventional volumetric techniques. Higher pollen amounts at higher altitudes also point at the necessity to monitor bioaerosols across the vertical dimension, especially in densely populated areas and high-traffic air space.