Achieving optically selective coatings of silica fixated carbon nanotubes for solar energy applications

Solar collectors have the potential for significant climate change mitigation by substituting heat produced with fossil fuels. To achieve this, collectors with highly efficient solar absorbers are essential. Carbon nanotubes are highly absorbing, sustainable, cheap, and thermally stable, making them a promising material for solar absorbers. However, achieving a high solar absorptance and low thermal emittance (solar selectivity), while maintaining good thermal stability and scalability is challenging. Here, we present a selective coating based on multi-walled carbon nanotubes and silica (SiO 2 ). A water-based dispersion enabled by carboxyl functionalization of the carbon nanotubes (CNT F ) is spray coated on a stainless steel (SS) substrate and fixated with sol-gel dip coated silica. The SS/CNT F /SiO 2 surface exhibits an optical selectivity dependent on CNT F area load and with 0.83 g CNT m −2 a solar absorptance and thermal emittance of 0.94 and 0.40, respectively, is achieved. The coating also demonstrates excellent thermal stability, with an estimated lifetime of >25 years at working temperatures ≤222°C. All together, we show that by using scalable and cheap technology, concurrent with sustainable materials and a simple structural design, we can manufacture a coating that exhibits properties suitable for low-to-mid-temperature applications. Our study highlights the potential of carbon-based solar absorbers. • We present a novel selective coating based on multi-walled carbon nanotubes and silica (SiO 2 ). • The SS/CNT F /SiO 2 surface exhibits a high solar absorptance and an optical selectivity. • The coating demonstrates good thermal stability, with an estimated lifetime of >25 years at working temperatures ≤222 °C. • The coating exhibits properties suitable for low-to mid-temperature applications.