Investigating the impact of nanofluids and exergy metrics for integrated solar-biomass SCO2 power and desalination cycles

Several strategies have emerged for utilizing waste heat across diverse sectors. Yet, integrated systems that merge power generation with freshwater production, especially those leveraging renewable energy, remain relatively unexplored. Addressing this gap, a novel solar biomass-driven system is under development for power generation and desalination facilities. In the suggested system, rather than wasting the energy of a supercritical CO 2 power cycle, a bottoming cycle is proposed to augment energy utilization factor (EUF). By integrating humidification-dehumidification, thermal vapor compression, and reverse osmosis (HDH-TVC-RO) with a multi-effect distillation (MED) unit, freshwater production rate is significantly enhanced. The outcomes reveal a freshwater output of 29.36 kg/s, a gained output ratio (GOR) of 17.36, and the EUF of 3.372. Various nanofluids have been assessed for the solar collector and due to superior total exergy efficiency and less corrosion effects, Cu- and carbon-based nanoparticles are recommended. Sensitivity analysis indicates that increasing the pressure ratio of compressors boosts the total GOR. Furthermore, adjustments to both the parameters of pressure of steam fed to HDH-TVC, and the compressor pressure ratio demonstrate a linear effect on EUF behaviour. • Solar and biomass energy integrated for electricity and freshwater production. • Power output of 4879 kW, freshwater rate of 21.11 kg/s, EUF of 3.354. • Nanofluids improve performance of the solar desalination system. • Gasifier and combustor cause 6500 kW exergy destruction. • Compressor pressure ratio peaks at 3, optimizing power and exergy efficiency.