Determination of the geometric parameters of the defects based on the tomographically obtained data and their influence on the fatigue behavior of the S960 with laser cladded protective layers
This article deals with identifying defects of layered high strength steel materials with the help of tomography measurement. Test samples were made of S960 High Strength Steel to which layers of either aluminium bronze, hardchrome, cobalt alloy or stainless steel were applied by a laser cladding technology. The experimental campaign included a study of morphometric parameters of internal defects in and near the bi-material interface region using X-ray micro-tomography and their potential influence on the fatigue behavior during a three-point bending test.
Authors
- Stanislav Seitl (ORCID: https://orcid.org/0000-0002-4953-4324)
- Lucie Malíková (ORCID: https://orcid.org/0000-0001-5868-5717)
- Pavel Doubek (ORCID: https://orcid.org/0000-0002-3010-8771)
- Ivana Kumpová (ORCID: https://orcid.org/0000-0001-8556-4996)
- Mohammad Sami Al Khazali
Institutions
- Czech Academy of Sciences (CZ)
- Czech Academy of Sciences, Institute of Theoretical and Applied Mechanics (CZ)
- Czech Academy of Sciences, Institute of Physics of Materials (CZ)
- Brno University of Technology (CZ)
Publication Details
- Journal
- Frattura ed Integrità Strutturale
- Published
- 2024-10-11
- DOI
- https://doi.org/10.3221/igf-esis.71.06
- Primary Topic
- Additive Manufacturing Materials and Processes
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- European Commission
- Grantová Agentura České Republiky
- Vysoké Učení Technické v Brně