Benchmark experimental study on cavitating flow around Clark-Y 11.7 % hydrofoil at various angles of attack under controlled levels of dissolved air

The present research aims to study cavitating flow around a CLARK-Y 11.7% hydrofoil with variable angles of attack (α) while maintaining controlled levels of dissolved air in the operating fluid, which is water. A series of experiments were conducted using a water tunnel facility, where the cavitation characteristics were measured and observed using sensors and high-speed imaging techniques. The variables studied in the present work are cavitation number (1 ≤ σ ≤ 2.2) and angle of attack (α = 4°, 6°, 8°, 10°, and 12°), with dissolved air levels (DAL) in the range of 9.3 ppm to 13.1 ppm. The dimensionless cavity length decreases significantly with increasing values of σ/α, indicating an inverse relationship where higher cavitation numbers or lower angles of attack result in shorter cavities. The cavity length follows a power-law scaling relationship, with the empirical equation L max / C = 4.78 × σ / α − 0.76 .Increasing the angle of attack transitions the cavitation nature from stable (Mode I) to dynamic (Mode II) and highly oscillating (Mode III). Larger cavities result in lower Strouhal numbers, which indicates reduced vortex shedding activity. The relationship between the Strouhal number and the normalized cavitation number σ/α is characterized by the power-law equation St = 0.041 × σ / α 0.3 . The pressure coefficient at the leading-edge increases with the angle of attack at low cavitation numbers, while higher cavitation numbers lead to greater pressure coefficient differences between the leading and trailing edges. The present study offers an extensive dataset and empirical correlations that may serve as a benchmark framework, which facilitates the validation of computational and experimental models of cavitating flow under similar conditions.