Interfacial characterization of spinning water film along a concave wall

Abstract Thin liquid film flowing down the inner concave surface of a vertical cylindrical vessel is examined. At the top of the vessel, the water is injected horizontally at high speed circumferentially along the vessel wall and flows downwards due to the action of gravity. This turbulent film flow is modeled using the large eddy simulation (LES) and Reynolds averaged Navier–Stokes (RANS) approaches combined with the volume-of-fluid method. The results of both methods are validated with direct numerical simulation. The Favre-filtered two-phase LES, which is implemented and studied in this paper, can reasonably predict the film thickness similarly to that of the RANS approach using the elliptic blending Reynolds stress model, although it requires fine resolution in the wall region. The effect of volume flow rate on the film structure and thickness is investigated. The film thickness is shown to be nearly constant when the wall is partially wetted and changes as the cubic root of the volume flow rate when the spinning film encloses the entire circumference of the vessel.