Unifying creep and fatigue modeling of composites: A time-homogenized micromechanical framework with viscoplasticity and cohesive damage

A micromechanical model for simulating failure of unidirectional composites under cyclic loading has been developed and tested. To efficiently pass through the loading signal, a two-scale temporal framework with adaptive stepping is proposed, with a varying step size between macro time steps, and a fixed number of equally spaced micro time steps in between. With the focus on matrix dominated failure under off-axis loading, viscoplasticity and microcracking are included in the model for the polymer matrix, while carbon fibers are modeled as elastic. For a proper representation of viscous deformation in the matrix under cyclic loading, a two-scale version of the Eindhoven Glassy Polymer constitutive model is formulated, that is based on time homogenization with an effective time increment. The failure state of the representative volume element is reached by the initiation and damaging of cohesive microcracks. Cyclic and static degradation are represented by using Dávila’s fatigue damage function, which is built on top of Turon’s quasi-static cohesive model. The model results are compared with available experimental data on unidirectional carbon/PEEK composites tested at different stress levels, load ratios, frequencies and off-axis angles. Plasticity controlled and crack growth controlled failure mechanisms, characteristic of the long-term response of polymeric composites, are captured by the model, as well as their distinct frequency dependence. As a limit case, the model is able to reproduce the time to failure in creep loading, where the heterogeneous microstructure and viscoplastic flow of the matrix trigger the evolution of quasi-static damage. However, for the studied material system, the present model does not accurately reproduce the load ratio dependence and the off-axis angle dependence of the crack growth controlled failure mechanism. • A micromechanical model for fatigue and creep in PEEK/carbon composites is presented. • A two-scale temporal version of the Eindhoven Glassy Polymer (EGP) model is proposed. • The EGP model is combined with Dávila’s fatigue cohesive model for microcracking. • Two-scale adaptive stepping is proposed to efficiently go through a loading signal. • Plasticity controlled and crack growth controlled failure are distinctly captured.