Characterisation and properties of Nanohybrid Dental Composite (NhDC) reinforced with zirconia and alumina

A trial nanohybrid dental composite (NHDC) was developed using silica extracted from biowaste rice. Aim: This study aims to test the effect of mixture of the silica and other filler which is zirconia and alumina, focusing on the characterization and their properties. Nano-silica obtained from rice husk was used as NHDC filler. Methods: Nanosilica white powder, derived from rice husk, was used. There were three groups: Group I, Zr (2%) and Al (3%); group II, Zr (3%) and Al (2%); and group III, Zr (3%). The distribution of filler particles and the chemical structure of filler particles were determined by FESEM images and FTIR test. Then, testing on Vickers hardness (VHN) and fracture strength (FS) of the samples was performed. Results: The distribution of filler particles showed a uniform distribution, and each peak element of the fillers was shown in the FTIR spectrum images. There was significantly increased on VHN and FS after addition of zirconia and alumina. Conclusion: This study concluded that zirconia and alumina strengthen the NHDC properties with addition of zirconia and alumina filler.