Characteristics and evaluation of recycled waste PVCs as a filler in composite structures: Validation through simulation and experimental methods

Solar Cell as a renewable energy utilization in today's era is considered a suitable choice due to encompass sustainability, environmental preservation, and energy processing efficiency. Solar cells have a finite lifespan that need replacement to maintain energy absorption efficiency. Unfortunately, discarded materials are often underutilized or improperly disposed of. In this study, used photovoltaic solar cell materials are explored as reinforcements in composites. The results showed that 4% cell filler specimen exhibited highest ultimate tensile strength (UTS) with 51.43 MPa. Followed by Compression strength with 35.38 MPa and flexural strength with 45.54 MPa. SEM/EDS analysis of PV filler specimens revealed the dominance of Carbon (C) and Silica (Si) materials, comprising over 60%. FT-IR analysis indicated varying compound bond intensities affecting polymerization and material strength under applied forces. Simulation results showed a difference of less than 2% when compared to experimental testing outcomes. The current study benefited in environmental conservation efforts through waste reduction and the reuse of recycled materials and are listed in several applications such as in wind turbine, structures, lightweight laminates, automotive structures, and sport equipment.