Distributed optical fiber sensors for real-time tracking of fouling buildup for tubular continuous polymerization reactors

Early online fouling detection is expected to be a real step forward in the operation of continuous tubular reactors. As an online technology, the Rayleigh backscatter based D istributed O ptical F iber S ensor (DOFS) technology was evaluated with respect to temperature measurement resolution, reproducibility and the best online calibration method. Different coatings and terminations were characterized for emulsion polymerization reactors. Commercially available sensors with acrylate primary coatings, dual acrylate coatings, and polyimide coatings were all compared with each other. It is shown that the presence of a secondary coating significantly alters sensor behaviour. Sensors with only a primary coating showed a temperature resolution of 0.1 °C. Online calibration for temperature readout was carried out and validation tested on segments of fiber integrated in a 3D-printed reactor channel (diameter 1.5 mm). Acrylate coated sensors showed a deviation of 20% for the calibration coefficients when inside the reactor channel compared to the online calibration, leading to errors in temperature measurement. Polyimide coated sensors showed a deviation of just 0.6% in this validation test, demonstrating good capabilities for online calibration with accurate temperature measurements. The possibility of spatial and temporal monitoring of fouling buildup through a heat exchanging wall equipped with DOFS was evaluated. • Distributed Optical Fiber Sensing for chemical flow reactor purposes • Effect of primary and secondary acrylate and polyimide coating on sensor behavior • Integration of DOFS into flow reactor setups for reaction temperature measurement