Innovation in sustainable composite research: Investigating graphene-reinforced MMCs for liquid hydrogen storage tanks in aerospace and space exploration

The demand for lightweight materials in space exploration applications has seen a significant rise. This study presents a novel approach by integrating graphene with Aluminium alloy (AA) 2900 powder, synthesized through High energy ball milling technique. The resulting powder was used to reinforce Aluminium alloy 2195, creating metal matrix composites (MMCs) via squeeze casting. The findings demonstrate that incorporating 0.5 wt. % 2D graphene nanoplatelets (2D-Gr np ) in AA 2195 achieved density match, enabling homogeneous dispersion, addressing composite casting challenges. Consequently, the AA 2900 alloy embedded with 2D-Gr np facilitated the homogeneous dispersion of reinforcements during the squeeze casting process, yielding MMCs Ideal for potential use in lightweight liquid hydrogen fuel tank structures for launch vehicles. Following T8 heat treatment, the final casted composite plate exhibited significant enhancements in ultimate tensile strength, with a 4.5% increase over monolithic Al 2195-T8, exhibiting nominal reduction in elongation behavior and higher hardness. Additionally, scanning and transmission electron microscopy (SEM, TEM), Small Angle Neutron Scattering (SANS) and Electron Backscatter Diffraction (EBSD) revealed the squeeze casting technique's effectiveness by exhibiting enhanced bonding among homogeneously reinforced 2D-Gr np , T1/θ’ precipitates, and AA 2195.