Structure and dynamic viscosity of CaO–SiO2 and CaO–SiO2–B2O3 model slag systems

Correlation dependencies between the dynamic viscosity of slag and its structural parameters were studied to determine an optimal basicity of silicon smelting slag under the addition of boron oxide to eliminate slagging of the bottom of ore-smelting furnaces. Experimental studies were conducted on CaO–SiO 2 and CaO– SiO 2 –B2O 3 model slags obtained at 1600°С. Raman spectroscopic analysis was carried out using a Horiba JobinYvon HR800UV analyzer (France). Theoretical calculations of slag viscosity were performed using Urbain and Mills models. During the experiments, the key structural parameters of slag systems varied within the following limits: the experimental Raman spectrum deconvolution function from 1.41 to 2.45 and optical basicity from 0.58 to 0.68. The obtained experimental and theoretical data were related by mathematical dependencies. It was found that the dynamic viscosity of slag can be promptly determined by Raman spectroscopy on the basis of mathematical models. The dependence obtained shows that slag viscosity decreases upon an increase in the number of bridging oxygen atoms in the silicate anion structure. Notably, this decrease in slag viscosity is observed up to the value of the experimental Raman spectrum deconvolution function of ~1.55-1.60 or slag optical basicity of 0.60–0.62. When B 2 O 3 is added, the viscosity undergoes a further decrease. In practice, for CaO–SiO 2 slag systems, the use of boroncontaining flux as a liquefying agent is reasonable at CaO/SiO 2 = 0.61–0.63 while maintaining the content of B 2 O 3 in the slag at a level of 1%. The two models (classical and modified) proposed by Urbain were established to be more suitable for theoretical calculation of viscosity in CaO–SiO 2 and CaO–SiO 2 –B2O 3 systems. Mills’ model is not suitable for these purposes, since the correlation coefficients in the corresponding mathematical model are not sufficiently large. Further research in this direction is required in order to establish appropriate dependencies of slag viscosity on its structural parameters at different temperatures.

Authors

Institutions

Publication Details

Journal
iPolytech Journal
Published
2024-10-05
DOI
https://doi.org/10.21285/1814-3520-2024-3-562-575
Primary Topic
Metallurgical Processes and Thermodynamics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Structure and dynamic viscosity of CaO–SiO2 and CaO–SiO2–B2O3 model slag systems

Н. В. Немчинова, A. А. Yakovleva, С.В. Галачиева, А. А. Tyutrin et al.
iPolytech Journal
Metallurgical Processes and Thermodynamics
article

Structure and dynamic viscosity of CaO–SiO2 and CaO–SiO2–B2O3 model slag systems

Н. В. Немчинова, A. А. Yakovleva, С.В. Галачиева, А. А. Tyutrin, А. А. Ильин
article en

Abstract

Correlation dependencies between the dynamic viscosity of slag and its structural parameters were studied to determine an optimal basicity of silicon smelting slag under the addition of boron oxide to eliminate slagging of the bottom of ore-smelting furnaces. Experimental studies were conducted on CaO–SiO 2 and CaO– SiO 2 –B2O 3 model slags obtained at 1600°С. Raman spectroscopic analysis was carried out using a Horiba JobinYvon HR800UV analyzer (France). Theoretical calculations of slag viscosity were performed using Urbain and Mills models. During the experiments, the key structural parameters of slag systems varied within the following limits: the experimental Raman spectrum deconvolution function from 1.41 to 2.45 and optical basicity from 0.58 to 0.68. The obtained experimental and theoretical data were related by mathematical dependencies. It was found that the dynamic viscosity of slag can be promptly determined by Raman spectroscopy on the basis of mathematical models. The dependence obtained shows that slag viscosity decreases upon an increase in the number of bridging oxygen atoms in the silicate anion structure. Notably, this decrease in slag viscosity is observed up to the value of the experimental Raman spectrum deconvolution function of ~1.55-1.60 or slag optical basicity of 0.60–0.62. When B 2 O 3 is added, the viscosity undergoes a further decrease. In practice, for CaO–SiO 2 slag systems, the use of boroncontaining flux as a liquefying agent is reasonable at CaO/SiO 2 = 0.61–0.63 while maintaining the content of B 2 O 3 in the slag at a level of 1%. The two models (classical and modified) proposed by Urbain were established to be more suitable for theoretical calculation of viscosity in CaO–SiO 2 and CaO–SiO 2 –B2O 3 systems. Mills’ model is not suitable for these purposes, since the correlation coefficients in the corresponding mathematical model are not sufficiently large. Further research in this direction is required in order to establish appropriate dependencies of slag viscosity on its structural parameters at different temperatures.

iPolytech JournalVol. 28(3)
North-Caucasian Mining and Metallurgical Institute (RU), Irkutsk National Research Technical University (RU)
Openalex Percentile: Top 83%
Metallurgical Processes and Thermodynamics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.