Making Activator Materials Active Carbon From Wedi Skin Salak (Salacca edulis Reinw) With ZnCl2 Activator as Adsorbent to Reduce Fenol Content

Making Activator Materials Active Carbon From Wedi Skin Salak (Salacca edulis Reinw) With ZnCl2 Activator as Adsorbent to Reduce Fenol Content. Wedi salak skin in Bojonegoro as an activated carbon material can provide an alternative for activated carbon manufacturing materials by utilizing environmentally friendly natural materials. The wedi salak skin is modified by treatment in the sun, in the roast, and in the oven in the manufacture of activated carbon which is then activated with ZnCl2 and then tested the adsorbs power of this salak skin activated carbon against phenol reduction. The adsorbent material that reduces the concentration of phenol the most is the roasted adsorbent material with a final phenol concentration of 2.15 mg/L so that the concentration of phenol absorbed is 297.85 mg/L at a mass of 1.5 g. The results of the analysis show that each variation of the activated carbon variation can reduce the concentration of phenol. The results obtained from this study are the type of activated carbon material whose highest absorption efficiency is the type of activated carbon material roasted at 99.28% with a mass of activated carbon of 1.5 g. Based on the results of the analysis, it can be seen that each variation of the type of activated carbon material will experience a decrease in concentration as the mass of the adsorbent increases. The greater the mass of the adsorbent, the adsorption ability will also increase. Each type of activated carbon material also experienced an increase in percent removal along with an increase in adsorbent mass. The results of research on the effect of activated carbon mass, also show that the adsorption capacity value decreases with increasing adsorbent mass. In this research data, the largest capacitance value was 112.87 mg/g at the smallest mass of 0.5g. The decrease in adsorption capacity is caused by the active side of the adsorbent that has not all bonded with the adsorbate.

Authors

Institutions

Publication Details

Journal
Science Education and Application Journal
Published
2024-09-30
DOI
https://doi.org/10.30736/seaj.v6i2.1102
Primary Topic
Natural Products and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Making Activator Materials Active Carbon From Wedi Skin Salak (Salacca edulis Reinw) With ZnCl2 Activator as Adsorbent to Reduce Fenol Content

Aprillia Dwi Ardianti, Mohammad Anshori
Science Education and Application Journal
Natural Products and Applications
article

Making Activator Materials Active Carbon From Wedi Skin Salak (Salacca edulis Reinw) With ZnCl2 Activator as Adsorbent to Reduce Fenol Content

Aprillia Dwi Ardianti, Mohammad Anshori
article en

Abstract

Making Activator Materials Active Carbon From Wedi Skin Salak (Salacca edulis Reinw) With ZnCl2 Activator as Adsorbent to Reduce Fenol Content. Wedi salak skin in Bojonegoro as an activated carbon material can provide an alternative for activated carbon manufacturing materials by utilizing environmentally friendly natural materials. The wedi salak skin is modified by treatment in the sun, in the roast, and in the oven in the manufacture of activated carbon which is then activated with ZnCl2 and then tested the adsorbs power of this salak skin activated carbon against phenol reduction. The adsorbent material that reduces the concentration of phenol the most is the roasted adsorbent material with a final phenol concentration of 2.15 mg/L so that the concentration of phenol absorbed is 297.85 mg/L at a mass of 1.5 g. The results of the analysis show that each variation of the activated carbon variation can reduce the concentration of phenol. The results obtained from this study are the type of activated carbon material whose highest absorption efficiency is the type of activated carbon material roasted at 99.28% with a mass of activated carbon of 1.5 g. Based on the results of the analysis, it can be seen that each variation of the type of activated carbon material will experience a decrease in concentration as the mass of the adsorbent increases. The greater the mass of the adsorbent, the adsorption ability will also increase. Each type of activated carbon material also experienced an increase in percent removal along with an increase in adsorbent mass. The results of research on the effect of activated carbon mass, also show that the adsorption capacity value decreases with increasing adsorbent mass. In this research data, the largest capacitance value was 112.87 mg/g at the smallest mass of 0.5g. The decrease in adsorption capacity is caused by the active side of the adsorbent that has not all bonded with the adsorbate.

Science Education and Application JournalVol. 6(2)
Universitas Nahdlatul Ulama Indonesia (ID)
Responsible consumption and production
Openalex Percentile: Top 69%
Natural Products and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.