Mechanical Properties of Full-Scale Wooden Beams Strengthened with Carbon-Fibre-Reinforced Polymer Sheets

The strengthening, rehabilitation and repair of wooden beams and beams made of wood-based materials are still important scientific and technical issues. This is reflected, among other things, in the number of scientific articles appearing and the involvement of research centres around the world. This is also related to society's growing belief in the importance of ecological and sustainable development. This article presents an overview of the latest work in this field and the results of our own research on strengthening solid wooden beams with carbon-fibre-reinforced polymer (CFRP) sheets. The tests were carried out on full-size solid beams with nominal dimensions of 70 × 170 × 3300 mm. A 0.333 mm thick CFRP sheet was used for reinforcement. The research analysed various reinforcement configurations and different reinforcement ratios. For the most effective solution, a 46% increase in load capacity, 35% stiffness and 249% ductility were achieved with a reinforcement ratio of 1.7%. Generally, the higher the reinforcement ratio and coverage of the surface of the wood, the higher the strengthening effectiveness. The brittle fracture of wood in the tensile zone for unreinforced beams and the ductile crushing of wood in the compressive zone for reinforced beams were obtained. The most important achievement of this work is the description of the static work of beams in previously unanalysed configurations of strengthening and the confirmation of their effectiveness. The described solutions should extend the life of existing wooden buildings and structures and increase the competitiveness of wooden-based structures. The results indicate that, from the point of view of optimizing the cost of reinforcement, it is crucial to develop cheaper ways of combining wood and composite than to verify different types of fibres.