Simulation of Dendrite Growth with a Diffusion-Limited Aggregation Model Validated by MRI of a Lithium Symmetric Cell during Charging

Lithium metal batteries offer high energy density but are challenged by dendrite growth, which can lead to short circuits and battery failure. Multiple models with varying degrees of accuracy and computational cost have been developed to understand and predict dendrite growth. This study presents a simple model to simulate macroscale dendrite growth on lithium metal electrodes. The model uses a 3D single-particle Diffusion-Limited Aggregation (DLA) algorithm with an electric field bias to simulate dendrite growth. The electric field bias was introduced into the model with an important parameter, namely the biasing factor c, which determines the balance between diffusion and electric field effects. Before performing the simulation with the proposed model, the dendrite growth in a lithium symmetric cell during charging was measured by sequential 3D magnetic resonance imaging (MRI). These data were then used to validate the simulation, as the dendrite structure in each measured MRI time frame was used a starting point for a new simulation, the results of which were then validated with the measured dendrite structure of the next time frame. The best agreement between the simulated and measured dendrite structures using the overlap and displacement of deposition sites metrics was obtained at the biasing factor c = 0.7. This agreement was also good in terms with the fractal dimension of the dendrite structures. The proposed method offers a simple, accurate, and scalable framework for predicting dendrite growth over long deposition periods, making it a valuable tool for studying dendrite suppression under real-world battery charging conditions.