A Copper-Based Coating for the Control of Airborne Viable Bacteria in a Prison Environment

Infections in confined environments can spread by direct contact, contaminated surfaces, and airborne transmission. This is critical in prison facilities, where cleaning and sanitary conditions are inadequate. An alternative is the development of antimicrobial surfaces. A new antimicrobial coating was developed by incorporating copper microparticles into a standard commercial paint, aiming to reduce the concentration of bacteria on surfaces by granting antimicrobial properties to surfaces. The copper additive comprised Cu2Cl(OH)3 deposited on polyhedral zeolite. The efficacy of this coating was evaluated in detention cells in a police station, which are temporary prisons and inherently dirty environments. The experiment compared a cell painted with the copper additive coating and a control cell with the standard paint. Viable coliforms were measured on different surfaces and in the air for five months under normal usage. Bacterial load was reduced by ca. 68% by the copper-amended paint on cement surfaces. Surprisingly, airborne viable coliforms were reduced by ca. 87% in the detention cell treated with the copper coating. This research highlights the potential of antimicrobial coatings in controlling the spread of infections through contact with contaminated surfaces and emphasizes the significant reduction in airborne bacterial load. It is especially relevant for controlling infections where sanitization is limited but can be extended to other built environments, such as healthcare facilities.