Three-Dimensional Site Response Analysis of Clay Soil Considering the Effects of Soil Behavior and Type

To understand changes in bedrock motion at the ground surface, frequency effects, and spatial distribution within the soil, it is important to look at how a site responds to earthquakes. This is important for soil–structure interaction in structural and geotechnical earthquake engineering. This study deals with the effect of classifying clays according to shear wave velocity (stiff/medium/soft) and nonlinearity in behavior (linear/nonlinear) on the analysis of the site response. A 3D soil model with a combination of free fields and quiet boundaries and advanced constitutive models for soil to obtain accurate results was used to conduct this study. A strong TABAS earthquake was used to excite the compliant base of the model after converting the velocity record of TABAS to an equivalent surface traction force using a horizontal force–time history proportional to the velocity–time history. This study reveals that the site response analysis is affected by the type of clay soil and the soil material behavior, with soft clay soil causing higher PGV and PGV values in the linear case and lower values in the nonlinear case due to soil yielding, which causes soil response attenuation. This results in extremely conservative and expensive building designs when linear soil behavior is adopted. On the other hand, the applied earthquake exhibits greater attenuation at longer frequencies and greater amplification at mid and short frequencies. However, at frequencies near the applied earthquake frequency, neither attenuation nor amplification occurs. Furthermore, nonlinear soil behavior is crucial for soil evaluation and foundation design due to higher octahedral shear strain and settlement values, especially in softer soils, resulting from extensive plastic deformation.