Scenario analysis of supply‐ and demand‐side solutions for circular economy and climate change mitigation in the global building sector

Residential and non-residential buildings are a major contributor to human well-being. At the same time, buildings cause 30% of final energy use, 18% of greenhouse gas emissions (GHGE), and about 65% of material accumulation globally. With electrification and higher energy efficiency of buildings, material-related emissions gain relevance. The circular economy (CE) strategies, <i>narrow, slow, and close</i>, together with wooden buildings, can reduce material-related emissions. We provide a comprehensive set of building stock transformation scenarios for 10 world regions until 2060, using the resource efficiency climate change model of the stock-flow-service nexus and including the full CE spectrum plus wood-intensive buildings. The 2020-2050 global cumulative new construction ranges from 150 to 280 billion m² for residential and 70-120 billion m² for non-residential buildings. Ambitious CE reduces cumulative 2020-2050 primary material demand from 80 to 30 gigatons (Gt) for cement and from 35 to 15 Gt for steel. Lowering floor space demand by 1 m² per capita leads to global savings of 800-2500 megatons (Mt) of cement, 300-1000 Mt of steel, and 3-10 Gt CO₂-eq, depending on industry decarbonization and CE roll-out. Each additional Mt of structural timber leads to savings of 0.4-0.55 Mt of cement, 0.6-0.85 Mt of steel, and 0.8-1.8 Mt CO₂-eq of system-wide GHGE. CE reduces 2020-2050 cumulative GHGE by up to 44%, where the highest contribution comes from the <i>narrow</i> CE strategies, that is, lower floorspace and lightweight buildings. Very low carbon emission trajectories are possible only when combining supply- and demand-side strategies. This article met the requirements for a gold-gold <i>JIE</i> data openness badge described at http://jie.click/badges.