Method for Detecting Fire Indoors Based on Differences in Sample Averages of an Arbitrary Gas Environment Dangerous Parameter at Adjacent Observation Intervals

The object of the research is the series average of the dangerous parameters of the gas environment during the ignition of materials. The practical importance consists of using the difference between the average dangerous parameters of the gas environment on the intervals of absence and the presence of ignition to detect the ignition of materials. The theoretical substantiation of the method of detecting fires in premises is carried out based on sample averages fixed samples of current measurements of an arbitrary, dangerous parameter of the gas environment, which correspond to the general population of reliable absence and presence of fire. At a given significance level, the method determines the unbiased, uniformly most powerful fire detection rule. This allows you to determine how significant differences in sample means with a given significance level are due to ignition or are random. Laboratory experiments were conducted to verify the method of detecting the ignition of test materials. It was established, for example, that the maximum size of the effect ignition on the carbon monoxide concentration is typical for alcohol (exceeds the threshold by 8.9 times) and textiles (exceeds the threshold by 9.3 times). The size of the effect of the smoke density upon ignition of all materials is approximately the same and is determined by exceeding the corresponding thresholds from 4.62 to 3.9 times. The size of the effect on the temperature of the gaseous environment during ignition of all test materials is approximately the same order. It is characterized by exceeding the corresponding thresholds from 5.95 to 3.58 times. It is shown that the method of detecting fires allows to establish the extent to which the detected differences in sample means for samples from the general population of hazardous parameters of the gas environment are reliable with a given level of significance and are due to the ignition of materials or the action of random factors.