Applying Low-Impact Development Techniques for Improved Water Management in Urban Areas

Worldwide, the increase in impervious surfaces due to urbanization has led to significant water cycle issues such as groundwater depletion, urban heat islands, and flooding. To address these challenges, Low-Impact Development (LID) techniques are increasingly being applied in stormwater management. This study focuses on Ulsan, designated as a water cycle model city in South Korea, with a particular emphasis on the highly urbanized Okgyo drainage watershed. Using the Stormwater Management Model (SWMM) version 5.1, long-term runoff simulations were conducted to evaluate the effects of LID implementation on water cycle change rates and recovery rates. The model incorporates detailed hydrological and hydraulic parameters, including inflow, runoff, infiltration, and evapotranspiration for six subcatchments within the watershed. The SWMM was calibrated and validated using 30 years of historical rainfall data (1987–2016) from the Ulsan weather station. Calibration and validation processes used the NRCS-CN (Curve Number) method to ensure accuracy in simulating runoff patterns and water balance. The study specifically evaluated the effectiveness of two LID techniques: bioretention and permeable pavements. Three scenarios were modeled: bioretention applied to 5% of the area, permeable pavements applied to 5% of the area, and a combined application of both techniques. The results showed that the combined scenario provided the best outcome, with a 7.80% reduction in surface runoff and a 14.56% improvement in water cycle health. The LID application scenario confirmed the potential to achieve the water cycle management target of handling 25.5 mm of rainfall. These findings demonstrate that the introduction of LID techniques in public spaces can significantly enhance water management. This research provides insights into effective water cycle management methods tailored to specific urban land uses, laying a foundation for future urban planning and sustainable development.