Improving jet pump installations designs for oil production

The characteristics of jet pump installations are given, which are used mainly for low-yield wells in oil production whose flow rate is less than 10 m3/day. It is noted that jet pump installations have a relatively low efficiency of not exceeding 0.35, and it is almost equal to the efficiency of electric drive pump installations and downhole rod pump installations when extracting oil from wells with low flow rates of up to 20 m3/day. The advantages of jet pump installations over other types of downhole pumping installations in difficult oil production conditions are shown. With flow rates up to 150 m3/day. Costs for oil production using jet pump installations are minimal compared to other installations. A brief analysis of the designs of jet pumps, their main overall dimensions and weight is provided. A brief overview of scientific, technical and patent literature on jet pump installations is given. By changing the design of nozzles, confusers, diffusers, working chambers of jet pumps, as well as improving the jet pump installations as a whole when used in tandem with other types of well installations, their productivity, operating efficiency and reliability can be increased. It is noted that the parameters of jet pumps can be obtained by calculation based on the theory of mixing two flows, the theory of jet propagation in a mass of stationary or moving liquid and the mechanics of bodies of variable mass. The main design parameters of jet pump units are feed, pressure, ejection coefficient, power and efficiency. These parameters can also be determined experimentally. A laboratory jet pump unit has been developed. Experiments have shown that with an increase in the flow rate of the working fluid, the flow rate of the mixture and the working pressure, the ejection coefficient and efficiency decrease. In the future, experiments will be continued with various designs of jet pump elements.