Physical–Chemical and Thermal Properties of Clays from Porto Santo Island, Portugal

The use of clays for thermal treatments and cosmetic purposes continues to be a worldwide practice, whether through the preservation of native cultural traditions, pharmaceutical formulations or integrative health and well-being practices. Special clays, such as bentonites, are very common for healing applications due to their high cation exchange capacity (CEC), high specific surface area (SSA) and alkaline pH values and, therefore, are used in multiple therapeutic and dermocosmetic treatments. Numerous bentonitic deposits occur on Porto Santo Island with different chemical weathering degrees. This research evaluates which residual soils have the most suitable characteristics for pelotherapy. The texture of residual soils varies from silt loam to loamy sand and SSA between 39 and 90 m2/g. The pH is alkaline (8.7 to 9.6), electrical conductivity ranges from 242 to 972 µS/cm, and CEC from 50.4 to 86.8 µS/cm. The residual soils have a siliciclastic composition (41.36 to 54.02% SiO2), between 12.52 and 17.65% Al2O3 and between 52 and 82% smectite content, which are montmorillonite and nontronite. Specific heat capacity (0.5–0.9 J/g°C) and cooling kinetics (14.5–19 min) show that one residual soil has the potential to be suitable for pelotherapy according to the literature. Moreover, the residual soils have As, Cd, Co, Cr, Hg, Mn, Ni, Pb, Sb and V concentrations higher than the limits of guidelines for cosmetics and pharmaceutical products.