A new mesh deformation method using quaternion and displacement normal propagation for high quality and high efficiency

Mesh deformation technology is widely used in aerodynamic applications like unsteady flow, aeroelasticity, and aerodynamic shape optimization because of its low computational costs and consistent mesh connectivity. In order to raise deformed mesh quality and improve efficiency, a new mesh deformation method based on quaternion and displacement normal propagation (named QN method) is introduced in this paper. The boundary points propagate their displacements composed of translational vectors and quaternions to corresponding volume points along the normal direction under the control of the damping function, which preserves the mesh shape and guarantees the quality near boundaries, including orthogonality and normal size. It can also prevent the volume points from being interfered by other less relevant boundary points, so dealing with complex displacement fields effectively. In addition, it avoids complicated matrix and interpolation operations, thus saving lots of computational costs. For mesh with complex topology, a hybrid method combining the QN method and the radial basis function method (RBF method) is investigated to broaden application scenarios, which are applied to the mesh with normal correspondence inside the boundary layer and the mesh outside, respectively. Benefitting from effective handling for the near-wall elements by the QN method, the RBF interpolation part in the hybrid method requires minor support points to carry out valid large deformation, improving the deformation efficiency greatly compared to the individual RBF method. Five typical test cases with different deformation modes and mesh characteristics are implemented, showing better performance of the proposed method in deformed mesh quality and deformation efficiency.