Structure and properties of powders obtained by electrodispersion of pure Nickel metal waste in distilled water

Purpose. Investigation of the composition, structure and properties of powder materials obtained by electrodispersion of nickel waste of the PNK-0T1 brand in an oxygen-containing medium – distilled water. Methods. To determine the composition, structure and properties of powder materials, samples of powders obtained from waste nickel grade PNK-0T1 were studied. The powder material was obtained by electroerosive dispersion in distilled water. Microanalysis of powder particles was carried out using a scanning electron microscope, an analysis of the size distribution of powder particles was obtained using a particle size analyzer, an X-ray spectral microanalysis of powder particles was carried out using an energy-dispersive X-ray analyzer embedded in a scanning electron microscope, an analysis of the phase composition of powder particles was carried out using X-ray diffraction on the diffractometer. Results . During the study, it was revealed that the shape of the particles obtained from nickel powders is spherical and elliptical, and agglomerates of smaller particles are also noted on the increase. Oxygen and nickel are present in the composition of powder materials. The phases of pure nickel and nickel oxide NiO are marked in the phase composition. From the analysis of the granulometric histogram, it follows that the particle size spread varies in the range of 0.26...18.62 microns, the average volume diameter of the particles was 5.2 microns. Conclusion . The obtained research results can be used to develop a new heavy pseudo-alloy using metal waste from expensive raw materials by the method of electroerosive dispersion, followed by improvement and optimization of the composition and structure of the alloy.